DATA SHEETS

AVAILABLE PRODUCTS

Details

Aquaflex Fiber Plus is a liquid applied copolymer membrane containing a fibrous filament reinforcing. When fully cured Aquaflex Fiber Plus forms a flexible waterproofing lining for waterproofing showers and wet areas as described in Australian Standard AS 3740:2004, Waterproofing wet areas within residential buildings


Details

Aquflex PU non exposed is a one part coal, tar free moisture curing, self-leveling polyurethane membrane. After it has been cured it provides a tough seamless, tough and durable elastomeric high impervious barrier to moisture


Details

Aquagard M Primer is a fast drying, single pack modified polyurethane primer for use with all Elastomeric Polyurethane based Membranes.


Details

A synthetic rubber with properties which resist ageing from heat, sunlight and Ozone. It has excellent gas impermeability and toughness and remains flexible at low temperatures. Butynol will resist tearing, flex cracking, bubbling and abrasion. It is extremely strong has a long life and it’s versatile.


Details

Aquaflex Primer W is a single component water based acrylic coating used to penetrate and prime concrete and masonry surfaces. When dry it is a resistant to water. It is used as a primer prior to the application of water based membranes in internal or external applications.


Details

Duram Multithane UV is a single pack liquid applied, moisture curing, self-leveling waterproofing membrane which cures to from a seamless, tough, durable, elastomeric waterproofing membrane. Multithane UV incorporates UV stabilisers and UV absorbers to enable the product to provide greater UV protection and stability than conventional aromatic polyurethane membranes.

Details

The Sheet Membrane range of waterproofing products incorporates bituminous sheet membranes for a wide variety of Roofing and tanking situations. The range comprises both APP, torch applied products. Details for each product are contained in the individual product data sheet.

Ardex WPM 116: 2.7mm APP Bitumen Fiber backed base sheet, a polyester backed fiberglass reinforced modified bituminous membrane normally installed as a base layer in multy layer shelterbit systems. For heat sensitive substrates such as timber or thermal insulation.


Details

The Sheet Membrane range of waterproofing products incorporates bituminous sheet membranes for a wide variety of Roofing and tanking situations. The range comprises both APP, torch applied products. Details for each product are contained in the individual product data sheet.

Ardex WPM 150: 3.0mm Combined reinforce APP Bitumen Membrane, a 3.0mm thick combined reinforce (Polyester & Fiberglass) APP modified bituminous torch applied membrane, it’s used as a base or mid layer in a multi-layer bituminous membrane system.


Details

The Sheet Membrane range of waterproofing products incorporates bituminous sheet membranes for a wide variety of Roofing and tanking situations. The range comprises both APP, torch applied products. Details for each product are contained in the individual product data sheet.

Ardex WPM 185: 4.5kg per Sqm Mineral coated APP Bitumen Membrane (Shelterbit Mineral Membrane) A 4.0mm thick combined reinforced (polyester & Fiberglass) APP Modified bituminous torch applied membrane with a mineral slate finish. Designed as a cap layer in exposed membrane systems.


Details

Ardex WPM 188: 3.5mm Garden Tanking APP/SBS Bitumen Membrane (Shelterbit Garden Membrane) a 3.5mm thick combined reinforced (Polyester & Fiberglass) with Root inhibitors to prevent damage from plant roots. Ardex WPM 188 has been designed for waterproofing landscape and planter box areas. It also used in single or multilayer systems in horizontal or vertical tanking applications, this membrane is also suitable for colder climate conditions.


Details

Aquaflex Fiber Plus is a liquid applied copolymer membrane containing a fibrous filament reinforcing. When fully cured Aquaflex Fiber Plus forms a flexible waterproofing lining for waterproofing showers and wet areas as described in Australian Standard AS 3740:2004, Waterproofing wet areas within residential buildings


Details

Aquaflex Primer W is a single component water based acrylic coating used to penetrate and prime concrete and masonry surfaces. When dry it is a resistant to water. It is used as a primer prior to the application of water based membranes in internal or external applications.


Details

Aquflex PU non exposed is a one part coal, tar free moisture curing, self-leveling polyurethane membrane. After it has been cured it provides a tough seamless, tough and durable elastomeric high impervious barrier to moisture.

Details

Aquagard M Primer is a fast drying, single pack modified polyurethane primer for use with all Elastomeric Polyurethane based Membranes.

Atlantis Flo-Cell® Drainage Cell 20mm Large-300x82

The Atlantis Flo-Cell

Details

The Atlantis Flo-Cell® Drainage Cell is available in the following sizes;

  • 20mm
  • 30mm
  • 52mm

The Atlantis Flo-Cell® range is a versatile product suitable for many applications including the drainage of sports fields, civil works, retaining walls and landscaping applications.

The Flo-Cell® is also ideally suited for WSUD (Water Sensitive Urban Design) applications and provides an ideal use for increasing the permeability of ground areas which reduces overland flow and facilitates groundwater recharge.


Atlantis Flo-Cell® Drainage Cell 30mm Large Flo Cell WCLIP 300x82

30mm Large Flo Cell WCLIP-300x82

Details

The Atlantis Flo-Cell® Drainage Cell is available in the following sizes;

  • 20mm
  • 30mm
  • 52mm

The Atlantis Flo-Cell® range is a versatile product suitable for many applications including the drainage of sports fields, civil works, retaining walls and landscaping applications.

The Flo-Cell® is also ideally suited for WSUD (Water Sensitive Urban Design) applications and provides an ideal use for increasing the permeability of ground areas which reduces overland flow and facilitates groundwater recharge.


Atlantis Flo-Cell 52mm Large Flo Cell WCLIP 300x82

52mm Large Flo Cell WCLIP-300x82

Details

The Atlantis Flo-Cell® Drainage Cell is available in the following sizes;

  • 20mm
  • 30mm
  • 52mm

The Atlantis Flo-Cell® range is a versatile product suitable for many applications including the drainage of sports fields, civil works, retaining walls and landscaping applications.

The Flo-Cell® is also ideally suited for WSUD (Water Sensitive Urban Design) applications and provides an ideal use for increasing the permeability of ground areas which reduces overland flow and facilitates groundwater recharge.


Details

New Slim Modular Vertical Garden Green Wall System.

New for 2017 is the Atlantis Gro-Wall® Slim Line. The Gro-Wall® Slim Line is a new vertical garden green wall system that is built on the success of the Gro-Wall® range of products and provides a thinner profile making the system ideal for applications where space is limited.

The new features include built in drainage and irrigation locking clips.

The new planter tray is thinner in depth and allows for 6 litres of soil media ensuring healthy plant growth and moisture retention.

Plant to plant irrigation is beautifully balanced providing evenly distributed irrigation to the plant below. The Planter tray features drainage outlets that can be connected to standard irrigation pipes for connection to a drainage locations on site. This feature is ideal for indoor applications where drainage outlets are not available near the green wall vertical garden installation.

For more information please contact us.


Details

New Professional Modular Vertical Garden Green Wall System.

New for 2017 is the Atlantis Gro-Wall® Slim Pro. The Gro-Wall® Slim Pro is a new vertical garden green wall system that is built on the success of the Gro-Wall® 4.5 product and provides significant improvements and a thinner profile making the system ideal for applications where space is limited.

The new features include built in drainage, planter tray locks automatically when inserted and the irrigation can now be mounted on the front of the unit as well as in the center of the unit.

The new planter tray is thinner and allows for 6 litres of soil media ensuring healthy plant growth and moisture retention.

Plant to plant irrigation is beautifully balanced providing evenly distributed irrigation to the plant below. It is also now optional, and can be blocked off to allow the water to drain away to a drainage outlet with the use of irrigation pipes. This feature is ideal for indoor applications where drainage outlets are not available or for applications that require plants to be contained so as to prevent plant disease spreading to other plants.

For more information please contact us.


Foamular Insulation

Foamular Insulation

Details

  • FOAMULAR Extruded Polystyrene (XPS) Insulation provides advanced commercial and residential building solutions
  • Closed cell construction guarantees long-term thermal performance with high moisture resistance
  • Warranted to maintain 90% of its insulation value over 20 years
  • Compressive strengths from 150kPa to 650kPa available to meet high load demands

Ponds & Pumps

Aquaflex Ponds and Pump

Details

An ecosystem pond is self-sustaining, requires very little maintenance, and provides an opportunity to have koi fish as pets, without the regular upkeep of an indoor aquarium. Pond plants give you the chance to broaden your gardening horizons with choices that go beyond the standard, it will also bring value to your property. 


Garden & Pond 3 Light Kit

Garden & Pond 3 Light Kit

Details

  • Pre-wired for simple installation
  • Creates a warm natural looking light
  • Bulbs last 30 times longer than traditional halogen lighting
  • Uses only 3W of Electricity
  • Kit includes 3 Pre-wired 1W LED Spotlights
  • Automatic On/Off phot cell with integrated Timer
  • 6W/12V Transformer

Garden & Pond Spotlight

Garden & Pond Spotlight

Details

  • The small compact design makes it ideal for tucking into small places
  • Ideal for lighting or highlighting water features, trees and plants
  • Bulbs last 30 times longer than traditional halogen lighting
  • Creates a warm natural looking light
  • Equivalent to a 20W halogen bulb
  • Available in 3W and 6W

Garden and Pond Waterfall Up light

Garden and Pond Waterfall Up light

Details

  • The small compact design makes it ideal for tucking into small places
  • Ideal for lighting or highlighting water features, trees and plants
  • Bulbs last 30 times longer than traditional halogen lighting
  • Creates a warm natural looking light
  • LED 1W Equivalent to a 10W halogen bulb

Ultra Submersible Pump 500GPH

Ultra Submersible Pump 500GPH

Details

  • Submersible with ceramic shaft and bearings
  • Long life rare earth magnet
  • 12ft. Cord 115V 60Hz
  • Energy efficient
  • Rubber casing reduces vibration and noise

Submersible Fountain Pump- KING 2AF 25W

Submersible Fountain Pump

Details

  • 1.7M Head high
  • Maximum Flow of 1500 Ltr/hour (400GHP)
  • 25W/220V-240V 60Hz
  • Fully submersible
  • More powerful and energy efficient rare earth rotor
  • Epoxy resin encapsulated motor to ensure safety
Suitable for fresh and marine water 

Submersible Fountain Pump- KING 1AF 10.5W

Submersible Fountain Pump- KING 1AF 10.5W

Details

  • 1.2M Head high
  • Maximum Flow of 610 Ltr/hour (160 GHP)
  • 10.5W/100V-120V 50Hz
  • Fully submersible
  • More powerful and energy efficient rare earth rotor
  • Epoxy resin encapsulated motor to ensure safety
Suitable for fresh and marine water 

King -2A Water pump

King -2A Water pump

Details

  • 1.7M  Hmax
  • Maximum Flow of 1500 Ltr/hour (400 GHP)
  • 20W/100V-120V 50/60Hz
  • Fully submersible
  • More powerful and energy efficient rare earth rotor
  • Epoxy resin encapsulated motor to ensure safety
  • Suitable for fresh and marine water

Submersible Fountain Pump – King 5F

Submersible Fountain Pump – King 5F

Details

  • 4.00M Head high
  • Maximum Flow of 6000 Ltr/hour (1600 GHP)
  • 130W/220V-240V 50Hz
  • Fully submersible
  • More powerful and energy efficient rare earth rotor
  • Epoxy resin encapsulated motor to ensure safety
  • Suitable for fresh and marine water

Submersible Fountain Pump - King 4F

Submersible Fountain Pump - King 4F

Details

  • 2.4M Head high
  • Maximum Flow of 4800Ltr/hour (1270 GHP)
  • 90W/220V-240V 50-60Hz
  • Fully submersible
  • More powerful and energy efficient rare earth rotor
  • Epoxy resin encapsulated motor to ensure safety
  • Suitable for fresh and marine water

Submersible Fountain Pump – King 3AF

Submersible Fountain Pump – King 3AF

Details

  • 2.8M Head high
  • Maximum Flow of 4000Ltr/hour (1060 GHP)
  • 70W/220V-240V 50-60Hz
  • Fully submersible
  • More powerful and energy efficient rare earth rotor
  • Epoxy resin encapsulated motor to ensure safety
Suitable for fresh and marine water 

Submersible Fountain Pump – King 3F

Submersible Fountain Pump – King 3F

Details

  • 2.4M Head high
  • Maximum Flow of 2400Ltr/hour (635 GHP)
  • 35W/220V-240V 50-60Hz
  • Fully submersible
  • More powerful and energy efficient rare earth rotor
  • Epoxy resin encapsulated motor to ensure safety
  • Suitable for fresh and marine water

Ultraklean Pressurized Filter – 1000 Gallons

Ultraklean Pressurized Filter – 1000 Gallons

Details

  • Filters up to 1000 gallon ponds
  • Triple action foam filters from top to bottom
  • Can be hidden out of sight in the ground
  • Includes ¾” to 1 ½ “
  • Stepped hose tails
  • Available for 2000 and 4000 gallon ponds

LED Power supply Driver Suit – 240VAC-12VAC – 10W

LED power supply Driver Suite 240VAC

Details

  • Expanding black Polyurethane foam
  • Ideal for filling gaps and spaces between Rock
  • Helps optimize water flow
  • Safe for fish and plants

Economy Foam Gun

Economy Foam Gun

Details

  • Expanding black Polyurethane foam
  • Ideal for filling gaps and spaces between Rock
  • Helps optimize water flow
Safe for fish and plants

Pro Waterfall Foam Sealant

Pro Waterfall Foam Sealant 1

Details

  • Expanding black Polyurethane foam
  • Ideal for filling gaps and spaces between Rock
  • Helps optimize water flow
Safe for fish and plants

Details

General Polymer Characteristics: EPDM rubber (ethylene propylene diene monomer) is a type of synthetic elastomer characterized by a wide range of applications. EPDM exhibits satisfactory compatibility with fireproof hydraulic fluids, ketones, hot and cold water, and alkalis.

Available in different sizes contact our office for prices


Details

Floseal Vapour Lock is a two part, high performance, waterborne epoxy coating system used as a primer system for cement and masonry substrates where small degrees of movement are expected. Epoxy Vapourlock is regularly used where there is moisture, over green concrete and screeds as little as 24 hours.


Details

Ardex Hydrepoxy WPM 300 is water resistant, prevents rising damp, Efflorescence and withstands Hydrostatic pressure. Excellent adhesion to most substrates including damp surfaces and freshly laid green concrete, safe to use in sensitive locations.


Details

Duram S900 is a clear, high pH, deep penetrating siloxane waterproofing solution. Duram S900 penetrates in to the tissue of porous substrates and creates a waterproofing barrier below the surface preventing the ingress of water. Duram S900 also solves the problems associated with water penetration such as corrosion of steel reinforcement, friability and binder loss of surfaces, fungal and bacteria attack and degradation due to carbon dioxide permeability. Duram S900 is capable of withstanding high pH conditions such as found in new concrete and lime based mortars and bricks. Duram S900 still allows the diffusion of vapours or 'breathing' ability of the substrate.


Details

Duro Mastic BLW is a liquid applied, latex modified bituminous elastomeric waterproofing membrane which, when fully cured it forms a permanent flexible waterproof lining to most building surfaces including reinforce concrete, block work, brick work and cement render.


Details

Gripset C1P is a high performance 1 component flexible polymer cementitious membrane designed for a range of positive and negative waterproofing applications over concrete and masonry surfaces. Suitable for podiums, terraces, water tanks, water storage areas, basements, wet areas, cellar walls, lift pits, immersed and subterranean areas.


AquaBlock BT - Black Polyurethane

Aquablock BT

Details

Aqua Block BT is a single component, liquid applied, coaltar free, bitumen modified, moisture cured polyurethane waterproofing membrane designed to form a permanently flexible, seamless waterproofing membrane that is impervious to moisture.


Details

Duram Crysto flex is a class 11 Flexibility, two part waterproofing membrane comprising of a liquid component of selected polymers and a powder component of selected cements, fillers and aggregates


Details

Ardex WPM 150: 3.0mm Combined reinforce APP Bitumen Membrane, a 3.0mm thick combined reinforce (Polyester & Fiberglass) APP modified bituminous torch applied membrane, it’s used as a base or mid layer in a multi-layer bituminous membrane system.

When it comes to outdoor waterproofing, make sure you choose the right membrane that has good resistance to UV light and long protection to building surfaces. We also offer insulation, drainage and pebbles .

Our products are designed to waterproof most applications on exposed areas: Roofs, Green Garden Roofs, balconies, terraces, podiums and gutters.


Details

Duram Azcothane is a water-based, highly flexible, high performance, polyurethane fortified acrylic emulsion waterproofing membrane formulated for use is demanding exposed, under tile, underground and immersed waterproofing applications.
.


Details

ARDEX WPM 310 is a tough, UV stable flexible premixed liquid applied waterproofing membrane. It has been specifically formulated as a general purpose membrane for exposed wall and roof waterproofing. 
• Flexible – accommodates normal building movement
• Provides excellent UV resistance
• Decorative – choice of colours
• Green Star – meets the benchmark for VOC credit in the Green Building Council of Australia’s
Rating Tools


Details

A synthetic rubber with properties which resist ageing from heat, sunlight and Ozone. It has excellent gas impermeability and toughness and remains flexible at low temperatures. Butynol will resist tearing, flex cracking, bubbling and abrasion. It is extremely strong has a long life and it’s versatile.


Details

Duram Multithane UV is a single pack liquid applied, moisture curing, self-leveling waterproofing membrane which cures to from a seamless, tough, durable, elastomeric waterproofing membrane. Multithane UV incorporates UV stabilisers and UV absorbers to enable the product to provide greater UV protection and stability than conventional aromatic polyurethane membranes.


Details

ARDEX A 46 is a rapid setting and drying, slump-free mortar. Easy to use ARDEX A 46 mixes and trowels easily and gives a smooth finish on both walls and floors. The exceptional hardness and shrinkage free finish of ARDEX A 46 is ideal for creating new ramps, forming coves, patch repairs, stairs, making good around penetrations and filling cracks, from 2 – 30mm application 

Details

ARDEX LQ 92 is a cement-based underlay for levelling uneven concrete floors prior to tiling. Not recommended for use under vinyl coverings.
• Self smoothing
• Polymer modified – apply from feather edge to 10mm
• Early walkability – tile over after approx 4 hours
• Suitable for use with underfloor heating
• May be mixed with ARDEX Abalastic liquid when incorporating heating wires.


Details

MAXGRIP is a mixture of cements and selected special additives and aggregates. A pourable, cement-base, non-shrinking, quick-setting hydraulic compound.

• Setting anchor bolts, rail posts, signposts.

• Parking meters, reinforcing rods and fixtures.

• Heavy machinery anchoring, hooks, pulleys.

• Park seats, bridge railings, partitions.

• Safety rails, hand rails, balustrades.

• Flag and light poles.


Details

ECO SYSTEMS ECO SCREED RAPID CONCENTRATE is a rapid setting screed binder for mixing with graded screed sand aggregates 0 - 0.8mm Formulated for thin and thick bed installations, bonded and unbonded installations that require a fast setting screed with high strength. Recommended for internal and external applications. Suitable for a variety of domestic and commercial applications including levelling coats, mortar beds, sloped shower beds or fast set repair of masonry surfaces.


Problend Epoxy Grout – 2 Part Kit

Problend Epoxy Grout

Details

PROBLEND™ EPOXY GROUT is a 2-part, high performance, chemical resistant epoxy grout for internal and external applications. PROBLEND™ EPOXY GROUT is non sag, non shrink, easy application, easy clean up and is colour consistent. It is stain resistant, impermeable, and has high temperature resistance. PROBLEND™ EPOXY GROUT offers maximum protection against staining, and chemical attack from food, beverages, chemicals and cleaning detergents.


Details

Sikafloor Level PRO is a self-levelling underlayment used to level a substrate prior to the application of commercial & domestic flooring. Sikafloor Level PRO can be applied from 0 – 50mm in one application and seeks its own level in minutes.


Details

MAXSEAL FLEX is a two-component product. Component “A” is a water-based special acrylic resin and component “B”, is a mortar based mixture of special cements, additives and well-graded aggregates. Once applied and cured, MAXSEAL FLEX provides a non-toxic, flexible and waterproof coating with very high adhesion on those common substrates in construction Waterproofing and protection of water retaining structures, such as drinking water tanks, reservoirs, water mains and swimming pools. • Waterproofing of below-grade structures concrete, natural and traditional mortar plasters, blocks, Hebel etc. 


Details

Gripset C-Plug is a rapid setting, non shrink cement based compound that forms an instant waterproof seal against active water leaks under pressure. C-Plug is ideal for active water leakages through holes, cracks and similar openings in concrete and masonry surfaces.

Details

High performance, one component, flexible polymer cementitious membrane designed for a range of positive and negative waterproofing applications. Based on unique polymer technology providing outstanding waterproofing and adhesion properties for long term sealing performance and durability

Details

SikaGrout GP is a general purpose cementitious grout that is shrinkage compensated. SikaGrout GP is a blend of Portland cement, carefully selected and graded aggregates and admixtures.

Details

Sikafloor Level PRO Primer is a pre-mixed latex liquid designed for the priming of porous substrates prior to the use of Sikafloor Cement based levelling products.

Details

ARDEX WPM 002 (Superflex Two Part) is a tough, fast drying two component waterproofing membrane specifically designed for use under tiles. The product has been uniquely formulated with synthetic microfibers to increase its strength and eliminate the need for a separate reinforcement mat. ARDEX WPM 002 is based on the most advanced acrylic polymer technology, and is totally resistant to re-emulsification


Ardex WPM 300

Ardex WPM 300

Details

Ardex Hydrepoxy WPM 300 is water resistant, prevents rising damp, Efflorescence and withstands Hydrostatic pressure. Excellent adhesion to most substrates including damp surfaces and freshly laid green concrete, it is used as primer when waterproofing your swimmingpool or waterfeature .

Ardex Deckweb

Ardex Deckweb

Details

Reinforced cloth used in critical areas like, cracks, movement joints, corner/covingareas and also wall floor junctions ARDEX Deckweb’s principal function is to help build membrane thickness in critical areas like corners, wall to floor joints, pipe penetrations and its a must when waterproofing a swimming pool or waterfeature.


Ardex Optima

Ardex Optima

Details

A premium-grade two part adhesive with exceptional bond. Its unique formula enables ARDEX Optima to be used over a number of difficult to adhere to surfaces. Tenacious bonding – tile directly over existing tiles – no grinding back the glaze, no special primers
• Highly water resistant
• High initial grab
• Highly flexible – achieves S2 classification


Drizoro MAXPLUG

Drizoro Maxplug

Details

MAXPLUG  is a quick-setting cement-based mortar that instantly stops running water from cracks, fissures, holes or other openings in concrete and masonry. It is non-shrink and sets within three to five minutes depending on the temperature. Once MAXPLUG  sets, it adheres perfectly to the substrate. It only requires water for mixing.

MAXREST

Drizoro Maxrest

Details

MAXREST is a one-component structural repair mortar, made of special cements, additives and selected aggregates, which provides a thixotropic product with quick-setting time that does not shrink. It firmly adheres to the surface which it is applied on, restores concrete to its original condition.


Drizoro Maxeal Flex

Drizoro Maxeal Flex

Details

MAXSEAL FLEX is a two-component product. Component “A” is a water-based special acrylic resin and component “B”, is a mortar based mixture of special cements, additives and well-graded aggregates. Once applied and cured, MAXSEAL FLEX provides a non-toxic, flexible and waterproof coating with very high adhesion on those common substrates in construction. Used for Waterproofing and protection of water retaining structures, such as drinking water tanks, reservoirs, water mains and swimming pools. Its also used for Waterproofing of below-grade structures concrete, natural and traditional mortar plasters, blocks, Hebel etc. APPLICATION FIELDS artificial stone, bricks, concrete and Dincel.


Drizoro Maxrest Passive

Drizoro Maxrest Passive

Details

MAXREST PASSIVE is a one-component liquid product, ready to use as an oxide converter and protection of re-enforcing bars and other steel and iron surfaces against corrosion. MAXREST PASSIVE once applied Neutralizes the corrosion process, reacting quickly with the rust and transforms iron oxide into a stable passive layer giving full protection against corrosion, salts, acid and alkali attack.

Drizoro Maxkola Flex

Drizoro Maxkola Flex

Details

MAXKOLA FLEX is an improved cement adhesive mortar with reduced slip and extended open time (Type and class C2TE), composed of hydraulic and synthetic binders, that once mixed with water provides a high performance mortar with excellent adhesion and flexibility, suitable for tiling of low porosity tiles and on non-rigid substrates, in both indoor and outdoor surfaces.


Drizoro Maxmesh

Drizoro Maxmesh

Details

Woven fiberglass Membrane reinforcement used in conjunction with Maxseal Flex. Maxmesh is used to reinforce and strengthen areas such as wall floor intersections, cracks in suspended slabs, slabs, cold joints and construction joints.

Drizoro Maxjoint Elastic

Drizoro Maxjoint Elastic

Details

MAXJOlNT ELASTlC is a two-component product. Component A is a liquid based on special synthetic resins. Component B, supplied in powder form, as a mortar based mixture of cements, additives and special aggregates. When both components are mixed, an elastomeric product with high bond strength is achieved, suitable for sealing joints and cracks in concrete, pre-cast elements, mortars, bricks or other porous surfaces.

Maxjoint Elastic can withold hydrostatic pressure, can be applied on a wet surface and will fill up to a 40mm gap.


Details

High performance, one component, flexible polymer cementitious membrane designed for a range of positive and negative waterproofing applications. Based on unique polymer technology providing outstanding waterproofing and adhesion properties for long term sealing performance and durability


Gripset 2P

Gripset 2P

Details

Gripset 2P is a highly versatile, two component latex cementitious membrane designed for a range of waterproofing applications including internal and external wet areas, immersed and subterranean areas. Developed by advanced polymer technology, Gripset 2P provides a highly durable membrane while maintaining flexible and permanent waterproofing properties.

Gripset DM

Gripset DM

Details

Premium grade, cementitious mortar compound designed for use in conjunction with other Gripset membranes and additives for general and specialised applications.

  • For use directly with Gripset membranes and additives
  • Superior finishes and performance

If you need a qualified contractor, AQUAFLEX can organize it for you. Please take a look at some feature projects we've completed and see what makes us the leaders in waterproofing technologies

Not sure which solution fits you business needs?