Balconies & Decks

  • Balconies, Decks & Podiums

Balcony waterproofing can be achieved using almost any of the product ranges we have suggested.  Different systems have different benefits and some special considerations when evaluating which solution is best suited to your project.  Get in touch with us if you would like us to help you work out which solution should be used.

Balconies will require adequate fall in the substrate to allow the water to run off to an exit or drainage point/s.

When waterproofing balcony under a screed you will still have to apply another waterproofing membrane to the screed once dried to avoid any moisture soaking the screed and/or efflorescence rising from the screed through the finished surface.

AVAILABLE PRODUCTS

Aquaflex Fiber Plus is a liquid applied copolymer membrane containing a fibrous filament reinforcing. When fully cured Aquaflex Fiber Plus forms a flexible waterproofing lining for waterproofing showers and wet areas as described in Australian Standard AS 3740:2004, Waterproofing wet areas within residential buildings
Aquflex PU non exposed is a one part coal, tar free moisture curing, self-leveling polyurethane membrane. After it has been cured it provides a tough seamless, tough and durable elastomeric high impervious barrier to moisture

Aquagard M Primer is a fast drying, single pack modified polyurethane primer for use with all Elastomeric Polyurethane based Membranes.

A synthetic rubber membrane with properties which resist ageing from heat, sunlight and ozone. It has excellent gas impermeability and toughness and remains flexible at low temperatures.
ARDEX Butynol® protects against water, moisture vapour, gases, sun, ozone, frost,
acids, chemicals and bacteria.
• Single-ply, flexible syntehtic rubber membrane
• Superior weatherability
• Potable water AS4020 certificate approved
• No maintenance required
• Conforms to AS4654.1 - Waterproofing membranes for external above-ground use Materials

Aquaflex Primer W is a single component water based acrylic coating used to penetrate and prime concrete and masonry surfaces. When dry it is a resistant to water. It is used as a primer prior to the application of water based membranes in internal or external applications.
Duram Multithane UV is a single pack liquid applied, moisture curing, self-leveling waterproofing membrane which cures to from a seamless, tough, durable, elastomeric waterproofing membrane. Multithane UV incorporates UV stabilisers and UV absorbers to enable the product to provide greater UV protection and stability than conventional aromatic polyurethane membranes.

The Sheet Membrane range of waterproofing products incorporates bituminous sheet membranes for a wide variety of Roofing and tanking situations. The range comprises both APP, torch applied products. Details for each product are contained in the individual product data sheet.

Ardex WPM 116: 2.7mm APP Bitumen Fiber backed base sheet, a polyester backed fiberglass reinforced modified bituminous membrane normally installed as a base layer in multy layer shelterbit systems. For heat sensitive substrates such as timber or thermal insulation.

Ardex WPM 150: 3.0mm Combined reinforce APP Bitumen Membrane, a 3.0mm thick combined reinforce (Polyester & Fiberglass) APP modified bituminous torch applied membrane, it’s used as a base or mid layer in a multi-layer bituminous membrane system.

Ardex WPM 150: 3.0mm Combined reinforce APP Bitumen Membrane, a 3.0mm thick combined reinforce (Polyester & Fiberglass) APP modified bituminous torch applied membrane, it’s used as a base or mid layer in a multi-layer bituminous membrane system.

Ardex WPM 185: 4.5kg per Sqm Mineral coated APP Bitumen Membrane (Shelterbit Mineral Membrane) A 4.0mm thick combined reinforced (polyester & Fiberglass) APP Modified bituminous torch applied membrane with a mineral slate finish. Designed as a cap layer in exposed membrane systems.

Ardex WPM 185: 4.5kg per Sqm Mineral coated APP Bitumen Membrane (Shelterbit Mineral Membrane) A 4.0mm thick combined reinforced (polyester & Fiberglass) APP Modified bituminous torch applied membrane with a mineral slate finish. Designed as a cap layer in exposed membrane systems.

Ardex WPM 188: 3.5mm Garden Tanking APP/SBS Bitumen Membrane (Shelterbit Garden Membrane) a 3.5mm thick combined reinforced (Polyester & Fiberglass) with Root inhibitors to prevent damage from plant roots. Ardex WPM 188 has been designed for waterproofing landscape and planter box areas. It also used in single or multilayer systems in horizontal or vertical tanking applications, this membrane is also suitable for colder climate conditions.

Not sure which solution fits you business needs?